Blank Twin Cover Plate

Blank Twin Cover Plate

The Blank Twin Cover Plate closes an unused twin-gang wall box where no switch, socket or network outlet is installed. It creates a neat surface while reducing direct access to the empty opening. Therefore, it suits new installations, renovations and spaces where installers have removed old devices. Its plain white finish also helps the covered position blend with surrounding walls and fittings.

Product Overview

This cover plate fits a standard twin-gang wall box. Unlike a socket or data faceplate, it does not provide an electrical or network connection. Instead, its solid front conceals the complete opening and leaves a clean finish.

The plate uses ABS plastic and attaches to the wall box with screws. As a result, an installer can remove it later if the location needs a switch, socket or data outlet. This makes the plate useful when a building owner wants to reserve an existing wall box for a future installation.

In addition, the solid cover helps keep dust and loose debris away from the open box. However, installers must still terminate, isolate or protect any cables inside the box correctly. The plate does not replace approved cable termination or electrical safety procedures.

Key Features

• Twin-gang coverage: Covers a twin electrical or data box with one solid faceplate.
• Completely blank front: Conceals an unused opening without adding unnecessary sockets, ports or controls.
• ABS plastic construction: Provides a light and practical housing for indoor wall installations.
• Screw-mounted design: Secures the plate to a compatible wall box and allows later removal.
• White finish: Creates a simple appearance that suits many office, home and commercial interiors.
• Smooth surface: Supports easy cleaning and provides a tidy finish around the unused opening.
• UL94 V-0 material rating: The supplied product listing identifies the ABS material as flame resistant under this classification.
• Reusable wall position: Keeps the underlying box available for a future electrical or network outlet.

Technical Specifications

• Product type: Blank twin-gang cover plate
• Configuration: Solid twin cover
• Material: ABS plastic
• Colour: White
• Dimensions: 114 × 70mm
• Listed weight: 0.15lb
• Finish: Smooth, non-reflective surface
• Mounting method: Screw mounted
• Wall-box compatibility: Standard twin-gang wall box
• Listed operating temperature: -10°C to 60°C
• Listed flame rating: UL94 V-0

Common Applications

The Blank Twin Cover Plate suits homes, offices, schools, shops and other commercial buildings. For example, it can close a wall box left after an installer removes an old switch, socket or network outlet. It can also cover a spare box included during construction for a possible future connection.

Moreover, facilities teams can use the plate during room upgrades. A business may remove an unused data point but retain the wall box for later use. The solid cover keeps the location neat without forcing the team to remove the box or repair the entire wall immediately.

Installation Guidance

Before installation, confirm that the plate matches the wall box size and mounting pattern. Also, switch off the relevant electrical supply if the box contains or previously contained power wiring. A qualified electrician should inspect, isolate and terminate any electrical conductors inside the box.

Next, position the plate over the opening and align its mounting holes with the box. Insert the correct screws, then tighten them evenly. However, avoid excessive force because overtightening may damage the plastic or affect the plate’s alignment.

Finally, check that the cover sits firmly and does not leave exposed gaps around the box. The installation area should remain dry unless the complete enclosure carries a confirmed rating for the intended environment.

Also Check: