Siren box/Holder

Siren box/Holder

The Siren box/Holder provides a firm mounting point for a compatible alarm siren enclosure. Its powder-coated steel construction supports siren boxes weighing up to 5kg. In addition, the adjustable arm extends up to 200mm, allowing installers to position the mounted unit away from the supporting surface. The holder suits security alarm installations in homes, offices, shops and other managed properties.

Product Overview

This mounting accessory secures a siren box to a suitable wall or pole. Its four-point bolt pattern distributes the mounting load across four fixing positions. Therefore, it provides a stable base when installers use the correct fasteners for the supporting surface.

The adjustable arm also helps installers select a suitable position for the siren enclosure. For example, they can move the box away from a wall edge or other obstruction. However, they must keep the total mounted weight within the listed 5kg capacity.

In addition, the holder uses powder-coated steel with a grey finish. The coating helps protect the steel surface during normal use. The product listing also states an IP54 rating. However, this rating applies only to the listed holder and does not confirm the weather protection of the attached siren, wiring or cable entries.

Key Features

• Powder-coated steel: Provides a firm structure for mounting compatible siren enclosures.
• Up to 5kg load capacity: Supports a siren box within the listed weight limit when correctly installed.
• Adjustable mounting arm: Extends up to 200mm to provide additional positioning flexibility.
• Four-point bolt pattern: Uses four fixing positions to support stable attachment to a suitable surface.
• Grey finish: Gives the holder a simple appearance for indoor and outdoor alarm installations.
• Listed IP54 rating: Indicates limited protection against dust and splashing water under the supplied product specifications.
• Included mounting hardware: The listing states that the package includes screws and anchors for installation.
• Compact bracket dimensions: Uses a listed bracket size of 150 × 100mm.
• Lightweight design: The listed 0.8kg weight supports easier handling during installation.

Technical Specifications

• Product type: Siren box mounting holder
• Material: Powder-coated steel
• Finish: Grey powder coat
• Listed load capacity: Up to 5kg
• Bracket dimensions: 150 × 100mm
• Adjustable arm length: Up to 200mm
• Mounting pattern: Four-point bolt pattern
• Listed environmental rating: IP54
• Listed operating temperature: -20°C to 60°C
• Listed product weight: 0.8kg
• Package contents: Mounting screws and anchors

Common Applications

The Siren box/Holder suits residential alarm installations where a siren enclosure needs a raised wall position. It can also support commercial alarm systems in shops, offices and other business premises.

Moreover, schools, warehouses and managed facilities can use the holder to position compatible warning equipment. The adjustable arm helps when the siren box needs clearance from the mounting surface.

However, the holder does not generate an alarm or sound. It only supports the enclosure. Therefore, the installer must select a compatible siren, control system, wiring method and power source separately.

Installation Guidance

First, confirm that the siren box weighs no more than 5kg. Then, compare its mounting points with the holder and verify that the bracket provides secure mechanical support.

Next, choose a stable wall or pole that can carry the combined weight of the holder and siren box. Use fasteners that suit the surface material. Although the package lists screws and anchors, the supplied hardware may not suit every concrete, masonry, metal or timber surface.

After mounting the bracket, adjust the arm to the required position. Then, tighten all adjustment points before attaching the siren enclosure. Finally, route the alarm cable without sharp bends, exposed joints or unnecessary strain.

Inspect the installation after completion. Also, check the fasteners during routine alarm maintenance because vibration, weather and movement may loosen mechanical connections over time.

Why Choose This Product?

The Siren box/Holder combines a steel bracket, adjustable arm and four-point mounting pattern in one alarm accessory. Therefore, it offers a practical way to position a compatible siren enclosure on a wall or pole.

Furthermore, its listed 5kg capacity supports a range of small alarm boxes. The powder-coated finish and listed IP54 rating also suit installations that may face limited dust or water exposure. However, installers must still confirm the environmental ratings of the complete alarm assembly.

Frequently Asked Questions

What weight can the holder support?

The supplied specifications list a maximum siren box weight of 5kg. Installers must also consider the strength of the wall or pole, the mounting hardware and the selected fixing points before attaching the enclosure.

Can installers adjust the holder position?

Yes. The holder includes an adjustable arm with a listed extension of up to 200mm. After choosing the required position, tighten all adjustment points before attaching the siren box.

Does the holder include the alarm siren?

The available information describes a mounting holder rather than a complete alarm siren. Therefore, confirm the package contents before ordering and select the siren enclosure, alarm controls and wiring separately.

Is the holder suitable for outdoor installation?

The listing states an IP54 rating for the holder. However, the complete installation depends on the siren enclosure, cable entries, wiring and mounting method. Confirm that every component suits the intended environment.

Also Check: