Dlink DES-3200-52P 48-port 10/100Base-T PoE + 2 1000Base-T ports + 2 Combo 1000Base-T/SFP ports Managed Switch
KSh132,000.00 Excl. Tax
Dlink DES-3200-52P 48-port 10/100Base-T PoE + 2 1000Base-T ports + 2 Combo 1000Base-T/SFP ports Managed Switch
Out of stock
Genuine product Secure checkout Warranty and order support Discounted Prices
Dlink DES-3200-52P 48-port 10/100Base-T PoE + 2 1000Base-T ports + 2 Combo 1000Base-T/SFP ports Managed Switch
The DES-3200 switches is a line of managed switches D-Link 2-level, intended for networks Metro Ethernet (ETTX and FTTX) and corporate networks. Switches in this series are equipped with 8/16/24/48 port 10/100 Mbit / s Fast Ethernet, as well as combo port 1/2/4 Gigabit Ethernet / SFP. Dlink DES-3200-52P 48-port 10/100Base-T PoE + 2 1000Base-T ports + 2 Combo 1000Base-T/SFP ports Managed Switch made in the body width of 9.11 inches and are equipped with a passive cooling system, suitable for desktop use and for use in telecommunications and cabinets. Switches DES-3200-26,28,28 / ME, 28F, 52 1U height designed for installation in 19-inch rack and provides a connection to copper or optics (24/48 port) at a speed of 100 Mbit / c. All devices have a series of practical design with 1, 2 or 4 combo ports of Gigabit Ethernet / SFP, which provide bandwidth of up to 4 Gb / s and allow to use these switches in a ring topology. Switch DES-3200-28 / ME is made specifically for use in telecommunication closets, where operators and engineers have access only to the front of the device and need quick troubleshooting. All interfaces are located on the front of the DES-3200-28 / ME, including the connector for the power cable that meets the requirements of large networks. In addition, the switch DES-3200-28 / ME is equipped with a connector “dry contacts” for event detection and alarm. DES-3200-28F is the ideal solution for network deployment FTTX, allowing you to bring fiber optic line directly to the subscriber unit. Through the use of a switch DES-3200-28F fiber-optic communication lines to connect subscribers significantly increased transmission distance (up to 20 km) and excludes the impact of crosstalk inherent in copper. Switches DES-3200-28P / 52P meet the standards of PoE (Power over Ethernet-cable) IEEE 802.3af and IEEE 802.3at and provide power up to 15.4 watts per port and up to 30 watts on the first four / eight ports. Supports PoE / PoE + devices such as video / IP-phones, wireless access points and IP-cameras, lets you apply power to them directly from the switch to Ethernet-cable, which greatly simplifies network deployment. All switches DES-3200 series are equipped with 2 or 4 Gigabit ports SFP, which provides the ability to select the type of network topology, “ring”, “tree” or mixed type.
Safety and reliability
Switches DES-3200 series supports access control based on 802.1x port / host, the ability to create a guest VLAN, and authentication and RADIUS / TACACS / XTACACS / TACACS + when connected to a switch. Function IP-MAC-Port Binding allows administrators to bind IP-address and MAC address of the user to a specific port number on the switch, thereby prohibiting the user to change the network settings. Moreover, thanks to the DHCP Snooping, the switch automatically detects pairs of IP / MAC-addresses issued by the server, DHCP-tracking packages and storing them in a “white list” IMPB. These features play a significant role in the support of network security. Built-in D-Link Safeguard Engine provides identification and prioritization of packets to be processed directly by the CPU switch to prevent malicious attacks and counteract the effects of parasitic traffic on the CPU switch. In addition, DES-3200 supports the list contains a complete access control (ACL). This functionality allows administrators to restrict access to network services and does not affect the performance of the switch.
Resilience / performance
Switches DES-3200 series supports the Protocol 802.1D-2004 edition, 802.1w and 802.1s Multiple Spanning Tree (MSTP). STP allows you to organize backup route data used in the event of any failed switch on the main route of the network traffic. The switches also support link aggregation, standards-based 802.3ad (LACP) and 802.1AX, allowing you to group multiple ports, increasing the bandwidth and increasing fault tolerance connections between network devices. The switches support 802.1p for Quality of Service (QoS). In addition, the traffic can be prioritized on the basis of marks TOS, DSCP, MAC-addresses or IP-address of the client, Vlan number, port number, TCP / UDP, protocol type, or based on the contents of packets specified by the user. This functionality is especially important in the provision of IPTV. Also DES-3200 series supports functional Voice VLAN, is a separate vlan, which is automatically placed in voice traffic, with a view to its subsequent processing with a higher priority level than the rest of the traffic.
Traffic Control and Bandwidth
With Bandwidth Control allows network administrators to define bandwidth for each port increments up to 8 kbit / s for incoming and outgoing traffic. The switches also support the functional protection from the storm (Storm Control), which allows you to get rid of unnecessary broadcast / multicast traffic. Port Mirroring facilitate traffic diagnostics and helps administrators to monitor network performance. Switches DES-3200 series supports markers “two-speed, three-colored marking” and “One speed, three color labeling” (trTCM / srTCM), allowing due to the decomposition of flows on the priorities to ensure maximum throughput of important traffic.
Multicasting
Switches DES-3200 series supports a complete set of functions for working with L2 multicast, including IGMP Snooping, IGMP filtering, Fast Leave. Thanks to the support of the functional switch DES-3200 provides an opportunity to work with IPTV-services, enjoys a growing demand in the market.
IGMP / MLD Snooping provides host-based connection of multiple customer multicast group to one network interface. When using the ISM VLAN multicast traffic for the purpose of efficient spending bandwidth transmitted in a separate Vlan. ISM VLAN profiles allow users to quickly and easily assign / change the preset settings on ports multicast subscribers.
OAM
Switches DES-3200 series support the diagnosis cable to check the status of network cables and identify the cause of malfunction of the cable. Function 802.1ag Connectivity Fault Management (CFM) provides tools for surveillance, as well as for troubleshooting in complex and Ethernet-enabling service providers to perform the connection test and quickly locate network problems, identify the user faced with these problems. Functions 802.3ah Ethernet OAM, Dying Gasp and D-Link Unidirectional Link Detection (DULD) can improve network manageability and increase stability of the compound, as well as to detect the fault.
Management functions
Switches DES-3200 series supports standard management protocols such as SNMP, RMON, Telnet, SSH / SSL. The user-friendly web interface for easy management. DHCP automatically is an enhanced management feature that allows administrators to pre-configure the settings and save them to a TFTP-server and automatically apply to the switches in the process of obtaining IP-address from the server that makes network configuration easier and faster. Supported protocols LLDP and LLDP-MED enables detection used in an Ethernet network equipment. In accordance with the result of the search, the administrator can easily apply the settings for device discovery and obtain a graphical representation of the topology using the network management system (NMS).
Function D-Link Single IP Management (SIM) simplifies and improves the efficiency of management tasks, allowing the simultaneous configuration of multiple switches, surveillance and maintenance from any location using a Web-browser. Moreover, the switch DES-3200 series supports software D-View 6.0. D-View 6.0 is a Network Management System that allows you to improve the most important for the network characteristics such as availability, reliability, fault tolerance and security. D-View 6.0 provides network administrators with a set of useful tools for effective configuration management, performance and security, as well as error detection.
Support for IPv6
Switches DES-3200 series has successfully passed the certification IPv6 Ready Logo Phase 2, which guarantees the operation of the switch in networks IPv6. In addition, this series supports both protocol stacks IPv4 / v6, allowing switches to act as a bridge between IPv4 and IPv6. With the constant expansion of the network security problem is most acute. To solve it, a series of DES-3200 supports features such as IPv6 ACL, IMPBv6 and L3 Control Packet Filtering, designed to protect against network attacks in IPv6 networks.
SPECIFICATION
Interface
- 48 10/100BASE-TX PoE
- 2 10/100/1000BASE-T
- 2 Combo 10/100/1000BASE-T or 100/1000 SFP
PoE Support
- Yes
PoE Budget
- 370W
PoE Ports
- 1-48
PoE+ Ports
- 1-8
Console Port
- RJ-45
Performance
Switching Capacity
- 17.6 Gbps
63-Byte Packet Forwarding Rate
- 13.1 Mpps
MAC Address Table-Size
- 16K Entries
SDRAM for CPU
- 128 MB
Packet Buffer
- 1.5MB
Flash Memory
- 32 MB
Jumbo Frame
- 12kb
Physical & Environmental
LEDs
- Power (Per Device)
- Console (Per Device)
- Link/Activity/Speed (Per Port)
Acoustic
- 39.3 dB at low speed
- 51.2 dB at high speed
Heat Dissipation
- 1608.196 BTU per hour
Power Input
- 100 to 240 VAC, 50 to 60 Hz Internal Universal Power Supply
Max Power Consumption
- 471.6 watts
Dimensions
- 17.36” x 12.13” x 1.732” (441 x 308 x 44 mm)
- 19-inch Standard Rack-Mount Width, 1U Height
Ventilation
- Smart Fans
Power Surge Protection
- All Ethernet ports support IEC61000-4-5 10/700us 6 KV surge protection
Operating Temperature
- 23°F to 112°F (-5° to 50°C)
Storage Temperature
- -40°F to 158°F(-40° to 70°C)
Operating Humidity
- 10% to 90% non-condensing
EMI
- FCC Class A
- CE Class A
- VCCI Class A
- IC
- C-Tick
Safety
- CE LVD
- UL/cUL
- CB
3rd Party Certifications
- MEF 21, IPv6 Ready Logo
MTBF
- 189,396 hours
- Software Features
Stackability
- Virtual Stacking: D-Link Single IP Management, Up to 32 units per Virtual Stack
L2 Features
- MAC Address Table: 8k
- Flow Control:
- 802.3x Flow Control
- HoL Blocking Prevention
- Loopback Detection
- Port Mirroring:
- Supports 1 Mirroring group
- Supports One-to-One, Many-to-One, Flow-based (ACL) Mirroring
- Ethernet Ring Protection Switching (ERPS)
L2 Protocol Tunneling
- Spanning Tree Protocols
- 802.1D STP
- BPDU Filtering
- 802.1w RSTP
- Root Restriction
- 802.1s MSTP
- 802.1Q-2005 MSTP
Link Aggregation
- Max. 14 groups (8 ports per group) Compliant with 802.1AX (formerly 802.3ad)
L2 Multicasting
- IGMP Snooping:
- IGMP v1/v2 Snooping, IGMP v3 awareness
- Supports 1K groups
- Port/Host-based IGMP Snooping Fast Leave
- Limited IP Multicasting:
- Up to 24 IGMP filtering profiles, 128 ranges per profile
- MLD Snooping:
- MLD v1, MLD v2 awareness
- Supports 1K groups
- IGMP Authentication
VLAN
- 802.1Q Tagged VLAN VLAN Group: Max. 4K VLAN
- Port-based VLAN
- MAC-based VLAN
- GVRP: Max. 255 dynamic VLANs
- 802.1v Protocol VLAN
- VLAN Trunking
- Asymmetric VLAN
- Double VLAN (Q-in-Q):
- Port-based Q-in-Q
- Selective Q-in-Q
- ISM VLAN
- VLAN Translation
L3 Features
- Gratuitous ARP
Quality of Service (QoS)
- Port-based Bandwidth Control: Ingress/Egress, min. granularity 8kbps)
- Flow-based Bandwidth Control:(Ingress, min. granularity 8 kbps))
- Per egress queue Bandwidth Control
- 4 queues per port
- DSCP
- 802.1p
- Queue Handling:
- Strict Priority
- Weighted Round Robin (WRR)
- Strict + WRR
- Remark 802.1p Priority Tag
- Remark ToS/DSCP Tag
- Bandwidth Control
- Flow Statistics
- Time-based QoS
- CoS Based on:
- Switch Port
- VLAN ID
- 802.1p Priority Queues
- MAC Address
- Ether Type
- IPv4/v6 Address
- IPv6 Traffic Class
- IPv6 Flow Label
- TOS
- DSCP
- Protocol Type
- TCP/UDP Port
- User-defined packet content
Access Control List (ACL)
- ACL based on: Switch Port
- VLAN ID
- 802.1p Priority Queues
- MAC Address
- Ether Type
- IPv4/v6 Address
- IPv6 Traffic Class
- IPv6 Flow Label
- ToS
- DSCP
- Protocol Type
- TCP/UDP Port
- User Defined Packet Content
- Up to 512 ingress access rules
- Time-based ACL
- ACL Statistics
- CPU Interface Filtering
Security
- SSH v2
- SSL v1/v2/v3
- Port Security: up to 64 MAC addresses per port
- Broadcast/Multicast/Unicast Storm Control
- IP-MAC-Port Binding (IMPB):
- ARP Inspection
- IP Inspection
- DHCP Snooping
- Traffic Segmentation
- D-Link Safeguard Engine
- DHCP Server Screening
- DHCP Client Filtering
- DoS Attack Prevention
- ARP Spoofing Prevention
- BPDU Attack Protection
AAA
- Guest VLAN
- RADIUS
- TACACS+
- XTACACS+
- Trusted Host
- RADIUS Accounting
- Two-level User Account
802.1X
- Port-based Access Control
- Host-based Access Control
- Dynamic VLAN Assignment
- Identity-driven security policy assignment: QOS, VLAN
MAC-based Access Control (MAC)
- Port-based Access Control Host-based Access Control
- Dynamic VLAN Assignment
- Authentication Database Failover
- Identity-driven security policy assignment: QoS, ACL, VLAN
Microsoft® NAP (IPv4/v6)
- Supports 802.1x NAP
- Supports DHCP NAP
Management
- Web-based GUI (Supports IPv4/v6) Command Line Interface (CLI)
- Telnet Server/Client (Supports IPv4/v6)
- TFTP Client (Supports IPv4/v6)
- ZModem
- SNMP v1/v2c/v3
- SNMP Traps
- System Log
- RMON v1: Supports 1,2,3,9 groups
- RMON v2: Supports ProbeConfig group
- BootP/DHCP Client
- DHCP Auto-Configuration
- DHCP Relay
- DHCP Relay Option 12
- DHCP Relay Option 82
- PPPoE Circuit-ID Tag Insertion
- Dual Image
- CPU Monitoring
- SNTP
- LLDP
- Debug Command
- Password Encryption
SMTP
- Ping (Supports IPv4/v6)
- Traceroute (Supports IPv4)
- Command Logging
- ICMPv6
- Microsoft® NLB (Network Load Balancing) Support
OAM
- Cable Diagnostics
- 802.3ah Ethernet Link OAM
- Dying Gasp
- 802.1ag Connectivity Fault Management (CFM)
802.3ah D-Link Extension: D-Link Unidirectional Link Detection (DULD)
- MIB
- RFC 1065, 1066, 1155, 1156, 2578 MIB Structure
- RFC 1157, 2571-2576 SNMP MIB
- RFC 1212 Concise MIB Definitions
- RFC 1213 MIB II
- RFC 1215 MIB Traps Convention
- RFC 1398, 1643, 1650, 2358, 2665 Ether-like MIB
- RFC 1493 Bridge MIB
- RFC 1757, 2819 RMON MIB
- RFC 1907 SNMPv2 MIB
- RFC 2021 RMONv2 MIB
- RFC 2233, 2863 IF MIB
- RFC 2618 RADIUS Authentication Client MIB
- RFC 2620 RADIUS Accounting Client MIB
- RFC 2674, 4363 802.1p MIB
- RFC 2925 PING & TRACEROUTE MIB
- RFC 4188 Bridge MIB
IETF® Standard
- RFC 768 UDP
- RFC 783 TFTP
- RFC 791 IP
- RFC 792, 2463, 4443 ICMP
- RFC 793 TCP
- RFC 826 ARP
- RFC 854 Telnet
- RFC 951, 1542 BootP
- RFC 1321, 2284, 2865, 3580, 3748 Extensible Authentication Protocol (EAP)
- RFC 1492 TACACS
- RFC 1981 Path MTU Discovery for IPv6
- RFC 2068 HTTP
- RFC 2460 IPv6
- RFC 2461, 4861 Neighbor Discovery for IPv6
- RFC 2462, 4862 IPv6 Stateless Address Auto Configuration
- RFC 2463, 4443 ICMPv6
- RFC 2464 IPv6 Ethernet and definition
- RFC 2474, 3260 Definition of the DS field in the IPv4 and IPv6 Headers
- RFC 2544 Benchmarking Methodology for Network Interconnect Devices
- RFC 2571, 2572, 2573, 2574 SNMP
- RFC 2866 RADIUS Accounting
- RFC 2893, 4213 IPv4/IPv6 dual stack function
- RFC 3513, 4291, IPv6 Addressing Architecture
Warranty
- Limited Lifetime
Also Check
Only logged in customers who have purchased this product may leave a review.
Related products
D-Link Networking Equipment
KSh7,700.00 Excl. Tax
Out of stock
D-Link Networking Equipment
KSh35,000.00 Excl. Tax
Out of stock
D-Link Networking Equipment
Dlink DGS-1210-52P WebSmart Switch with 48 10/100/1000 Mbps Ports (24 PoE Ports) and 4 SFP Ports
KSh70,000.00 Excl. Tax
KSh30,000.00 Excl. Tax
Reviews
There are no reviews yet.